We check the feasibility of your individual floater project -- free of charge!

How well designed is the float that you are just planning? ?

How does a small float cope with difficult highly viscous media? Which float shape is the best? The float or sensor must not be affected by corrosive liquids -- but which material is the most suitable? High pressures or temperatures may damage the float -- what is the optimal thickness of the material? And which mounting system is to be used?

These problems are familiar to you when planning your level measurement or interface detection system?

You are not quite sure if the planned float will work as desired under everyday conditions? You need accurate readings? The float should not be too expensive? And you have not enough time on your hands to care of all these problems?

Then let Häberle do a floater check for you!

We take a detailed look on your project, putting every aspect through its paces, checking whether your planned metal float will ensure reliable level measurement under all conditions. We give expert advice on possible improvements to your design and also on cutting costs where this is possible. Let the experts in float design help you with your project.

How does the free floater project check work?

There are 3 possible ways:

• 1) Send a fax with your construction data and comments to our fax no. + 49 621 552613 (marked "Re: Floater Check") or
• 2) Send an e-mail (with "Floater Check" as subject), along with your construction data (PDF, JPG, ...) to: 
   
• 3) Call us by phone and explain your floater project to the experts.

Please note: We treat all enquiries as strictly confidential and will never forward your information, data or address to others. The floater project check is free of charge for trade and commercial enquiries only.